Wio L1 Pro

The Seeed Studio Wio Tracker L1 Pro is a professional-grade LoRa tracking device featuring ultra-low power consumption and built-in GPS, making it ideal for long-term battery-powered deployments. Inside the case there is even a solar panel connector!

• nRF52840: Ultra-low power ARM Cortex-M4 processor
• Built-in GPS: Integrated navigation and tracking
• SX1262 LoRa: Long-range communication
• Power Efficient: Optimized for battery life
• Professional Quality: Industrial-grade components
• Ripple Firmware Support: Takes advantage of the small screen, but confusing interface
• Custom Firmware: https://github.com/sosprz/Meshcore-Wio-Tracker-L1-Pro offers best functionality but isn’t open-source

Ideal for:

• Asset tracking applications
• Low-power remote nodes
• Solar-powered installations
• Professional deployments
• Long-term battery operation

• Flash with MeshCore Flasher
• Supports both Ripple and Community firmware
• Configure power settings for optimal battery life
• Requires external antenna

• Seeed Studio Documentation - ONLY for Meshtastic though
• Compatible with MeshCore Flasher

Suggested Firmware from sosprz

Check out the features this (closed source) firmware adds on their Github page.

To test it out:

• Connect tracker to computer via USB, double click upper (reset) button on the left which should bring up 2 new drives in Windows (file) Explorer: XIAO-Sense & TRACKER L1.
• Go to the latest releases page and download WioTrackerL1_companion_radio_ble-v1.14.0.69-31dd17d9.uf2 directly to Tracker L1, or to your desktop and then to the drive.
• Just copying a UF2 file will tell the arduino guts to use that as the new firmware, installing & restarting the device automatically.